NO. DESCRIPTION SPECIFICATON 1 Main specification (1) Operating weight without ripper 49000kg (2) Dimension without ripper 7100mm× 4314mm× 3928mm (3) Ground pressure 0.109Pa (4) Ground ability 30° (5) Min. Turning radius 4200mm (6) Min. Ground clearance 600mm (7) Max. Tractiveforce 450kN (8) Max. Forward speed 12.2km/h (9) Max. Reverse speed 14.8km/h (10) Blade capacity 14.6m3 (11) Blade Max. Lift above the ground 1620mm (12) Blade Max. Drop below the ground 749mm 2 Engine (1) Model KTA19-C525 (2) Type Straight vertical, four-stroke, water cooling, direct injection type. Turbocharger. (3) Start method Electric motor (4) Number of cylinder-bore*stroke 6-159-159 (5) Displacement 18.9L (6) Rated revolution 2000r/min (8) Rated horsepower 306kw (9) Max. Torque 1920 N. M (10) Max. Torque/revolution 1400 rpm (11) Min. Fuel consumption 210g/kw. H (13) Lubrication type Forced lubrication (14) Cooling type Water circulation (15) Fan type Blowing cooling (16) Air filer type 2 stage (17) Start motor 9kW/24V (18) Electric generator 50A/24V (19) Battery Made in china 3 Transmission system (1) Hydraulic torque converter 3-element, single stage, single phase (2) Cooling type Water cooling (3) Transmission Planetary (4) Bevel gear One bevel gear reduction (5) Forward: 1st 0-3.4km/h (6) Forward: 2nd 0-6.7km/h (7) Forward: 3rd 0-12.2km/h (8) Reverse: 1st 0-4.2km/h (9) Reverse: 2nd 0-8.0km/h (10) Reverse: 3rd 0-14.8km/h 4 Steering system (1) Steering clutch Wet, multiple disc, spring loaded, hand-operated with booster and hydraulic released. (2) Steering brake Wet, band brake, operated with hydraulic booster. (3) Final drive Planetary gear 5 Travelling system (1) Type K type suspension (2) Tooth depth 88mm (3) Number of track shoes 40 pics each side (4) Track width 610mm (5) Length of track on ground 3425mm (6) Track pitch 2260mm (7) Number of track rollers (each side) 2 each saide (8) Number of carrier rollers (each side) 7 each side (9) Ground clearance 600mm 6 Hydraulic system of work equipment (1) Rated pressure 20MPa (2) Hydraulic pump type Double gear pump (3) Dis[lacement 160ml/r (4) Valve type Pilot valve (5) Working oil tank 250L 7 Working equipment (1) Blade type Semi-U blade (2) Blade weight 6750kg (3) Dimension 4314mm*1875mm (4) Ripper type Single shank (5) Ripper weight 5152 kg (6) Ripper quantity 1 (7) Ripper digging angle 45° (8) Digging depth 723 (9) Ripper max digging depth 1350mm (10) Ripper max. Lift depth 1180mm
