Click to view the original image
JZL90 electromotion pedrail pile driver is new pile machine which has freedom property right. It is abroad apply to building groundworkrailway groundworkprevent or control flood project groundwork and all kind of construction. The machine has hereinafter characteristic: 1. It has bigger draw strength, diameter and depth of hole. 2. It has big earthing dimension. There are hydraulic legs on the frame of machine. It is safe and stabilization for travel and working. 3. Travel neatly and steadily, high construct efficiency and hasn't pile hole dead angle. 4. The stand pole adopts three point support and adjust in two direction. The pile is high uprightness. 5. It adopts electric power drive, it is low noise and no pollute. 6. Electromotor is low fault rate and easy to maintain. 7. There is wire control handle for choice, driver can observe the leg and slewing operation, and reduces work personnel. JZL90 dynamoelectric pedrail piling-frame is widely used for each kind of base-project, deep-pit project, prevent flood project of the city buildings and each kind of industry &civil building construction.Technical Parameter Item Unit Parameter Travel mode Electromotion pedrail Support mode of stand pole Three point support Slew angle ± 180° Stand height of stand pole m 36.5 Dimension of pole section mm 630 Allowed draw strength kN 640 Dimension of machine(L×W) m 11.5×6 Pedrail earthing m 4.5 Width of pedrail mm 800 Titling range of stand pole pitch 5"/reclined 3" Climbing ability pile frame 4"(without stand pole) Width of stand pole orbit mm 600×φ102/330×φ70 Hammer Size of hammer kW DZ90 Depth of pile m 30 Screw pile machine Max dia. of hole 800 Max depth. of hole m 31 Windlass Hoist speed of main windlass m/min 1.8/2.1/2.4 Hoist speed of Auxiliary windlass m/min 30 Slew device Slew speed r/min 0.25 Adjust device of slanting bracing Adjust liner velocity m/min 0.55 Travel device Travel speed km/h 0.25 Power of drive electromotor kW 2×11 Leg earthing press(without working device ) MPa 0.46 Hydraulic system Rating pressure MPa 16 Weight of machine t
