35KV Cross Linking Production Line This machine is used for continuous producing 6-35 kv votage class XLPE cable. The process is with the inactive gas Nitrogen as media, electric heating, water cooling cross linking.Producing way is semi-hanging.This line is comply with relevant provisions of applicable national standards and current international IEC standards. 1 production scope and main parameter. Cross section of conductor:Copper stranded wire:25-630MM2 Aluminium stranded wire:35-800MM2 Voltage class:6-35KV Designed outlet wire speed:0.8-30M/min Cross linking tube wall highest heating temperature:450 centi degree The layout way of tube:Semi-hanging Heating power of the tube:6*60=360KW The pressure of the inner tube:1-1.6mpa The length of the cross linking line:135m The material of the tube:1Cr18NiTi Whole power of the production line:-700Kw Nitrogen cost:3-5M3/h (pressure:1.6Mpa) Cooling water cost:20-25M3/h(pressure 1.6Mpa) Compressed air cost:800M3/h (pressure 0.6Mpa) 2 the devices PN2500 no-spool type pay-off:2sets Pay-off lead wheel:1set Accumulator:1set Up-tractor device:1 set 65 inner shield extruder:1 set The cross head of triple co-extrusion:1 set 150 insulation extrusion:1 set 90 outer shield extrusion:1 set Upper seal device:1set Cross linking tube and carrier roller:1 set Tube heating and cooling parts:1 set Hanging control device:1 set Lower seal device:1 set Lower tractor device:1 set 3150mm no spool wire arranging and take-up device:1 set Water level controlling device:1 set Nitrogen serve and discharge device:1 set Electric control device:1 set
