This machine is mainly used for grinding and polishing granite plate. Updating technology is used in this machine; It has reasonable structure, stable working conditions and high efficiency. Advanced control system, the PLC has been used to control the man-machine interface with LCD screen, wide plate type with automatic contour detection device and the aptitude control functions. The main technical parameter: 1. The grinder of the machine adopt universal shock attenuation device, have long life, low failure rate, high efficiency and low loss millstone. Non-friable board advantage 2. Conveying belt use international brands, uniform thickness, guaranteeing the thickness of sheet basic uniform. 3. Conveying belt and crossbeam can be adjusted through the frequency converter, to achieve variable speed control. 4. The Number of grinder is12-18, the width of grinder is 600-2000mm. Grinding and Polishing thickness is 15-50mm, grinder capacity is 11Kw.Machine Type HGM06/18(3+18) HGM09/18(3+18) HGM12/18(2+18) HGM14/18(18) HGM16/18(18) HGM20/18(18) No. of Calibrators 3 2 The wide slab calibrating heads’ sSize is the same as polishing heads.Uasually unload the polishingAbrasives and load the calibratingAbrasives for the front 2 heads. Working width 650mm 950mm 1250mm Calibrating plate diameter 680mm 980mm 1280mm Calibrating up-down movement power 0.75kw Calibrating main motor 22kw No. of polishing heads 18 Diameter of polishing head 450mm No. of abbrasivves 6 Main motor power 11kw Conveyor belt power 3kw Bridge movement power 4kw*2 Cleaning brusher motor 1.5kw Working thickness 20-50mm Water consumption 25L/min/heads Vertical stroke of polishing heads 150mm Cooling water pressure 0.15-0.3Mpa Processing capacity 0.6-1m/min 0.3-0.5m/min Total Power 278.75 278.75 256 210.5 210.5 210.5
