CG1646 Speed automatically reduces when driving with the fork at a height of 12" or higher. Small turn radius makes it suitable for narrow passage ways. The CURTIS electronic controller from helps provide plenty of low end torgue while increasing the motor and battery life. Foot pedal reduce fatigue. Conforms to ergonomic requirements. Conforms to EN 1726-1 and EN 1175-1 Smooth travel and lift with excellent controls to reduces product damages and increases productivity. Lift limit switch operates at maximum lift height to shut off pump motor. A heavy-duty 24-volt electrical system provides good travel and lift speeds. High quality hydraulic pump assures very little noise, maximum efficiency and durability. Drive units is equipped an electromagnetic brake that is spring applied and electrically released. The brake is activated by the control handle position. The handle is ergonmically designed with a raise, lower and horn button. European driving unit European pump station.Identification 1.2 Manufacturer’ s type designation CG1646 1.3 Drive: electric(battery or mains), diesel, petrol, fuel gas, manual electric 1.4 Type of operation: hand, pedestrian, stand ing, seated, order-picker Pedestrian 1.5 Load Capacity /rated load Q (t) 1.6 1.6 Load center distance C mm 600 1.8 Load distance, centre of drive axle to fork X mm 711 1.9 Wheelbase y mm 1310 Weights 2.1 Service Weight Kg 1365 2.2 Axle loading, laden front/rear Kg 1410/1555 2.3 Axle loadings, unladen front/rear Kg 1010/355 Wheels, Chassis 3.1 Tyres: solid rubber, superelastic, pneumatic, polyurethane) polyurethane 3.2 Tyre size, front 250x78 3.3 Tyre size, rear 80x70 1) 3.4 Additional wheels(dimensions) 150x54 3.5 Wheels, number front/rear(x=driven wheels) 1x+2/4 3.6 Track width, front b10(mm) 880 3.7 Track width, rear b11(mm) 390/515 Basic Dimensions 4.2 Lowered mast height h1(mm) 2098 4.4 Lift height h3(mm) 4514 4.5 Extended mast height h4(mm) 5100 4.9 Height of tiller in drive position min. /max. h14(mm) 965/1365 4.15 Lowered height h13(mm) 86 4.19 Overall length l1(mm) 1915 4.20 Length to face of forks l2(mm) 765 4.21 Overall width b1(mm) 1050 4.22 Fork dimensions s/e/l(mm) 60/180/1150 4.25 Width over forks b5(mm) 570/695 4.32 Ground clearance, center of wheelbase m2(mm) 50 4.33 Aisle width for pallets 1000x1200 crossways Ast(mm) 2271 4.34 Aisle width for pallets 800x1200 lengthways Ast(mm) 2236 4.35 Turning radius Wa(mm) 1605 Performance Data 5.1 Travel Speed, laden/unladen km/h 5.1/5.5 5.2 Lift speed, laden/unladen mm/s 113/160 5.3 Lowering speed, laden/unladen mm/s 95/100 5.8 Max. gradient performance, laden/unladen % 6/12 5.10 Service brake Electromagnetic E-Motor 6.1 Drive motor rating s2 60min kw 1.2 6.2 Lift motor rating at s3 15% kw 3.0 6.3 Battery acc. To DIN, no 4PzS 6.4 Battery voltage, norminal capacity V/Ah 24/280 Others 8.1 Type of drive control MOSFET Control 8.4 Sound level at driver’ s ear acc. to EN12053 dB(A) 67
