1) Certified by API Spec7-1 &ISO 9001: 2008 2) Stocks adequate&timely delivery 3) 30 years experience in tricone rock bit 4) Good quality and after-sale service TCI bits 1>Cutting Structure The durability of premium tungsten carbide inserts is improved with new formulas and new techniques for insert bit. 2>Gauge Structure Multiple gauge protection with gauge trimmers on heel and gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life. 3>Bearing Structure High precision bearing with two thrust faces. Balls lock the cone. Hardface heard bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved and suitable for high rotary speed. 4>Seal and Lubrication The advanced metal seal package consists of two metal seats and two elastic energizers. Compressed energizers ensure good contact being kept on two sealing surfaces of metal rings by elastic force, and achieve the bearing seal. In the drilling, metal seal are relatively dynamic, and the energizers are static. This will improve the reliability and durability of bearing seal. The pressure compensator system and advanced grease can greatly increase the lubricating reliability. 5>Product Application It is suitable for downhole motor and high speed applications. Please specify the following on enquiry, Bit diameter IADC code Bearing type Drilling formation Thread ConnectionSize 13 5/8” (346.0mm) IADC 537G Bearing Type Metal sealed journal bearing Thread Connection 6 5/8 reg pin WOB(KN/mm) 0.45~1.0 RPM(r/min) 220~50 Applicable Formations medium hard formationswith low compressive strength, such as medium, soft shale, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds, etc. Circulation system Mud pump Available sizes: 60mm, 65mm, 76mm, 93mm, 95mm, 98mm (3 7/8” ), 101.6mm, 114mm, 118mm, 120mm, 127mm(5” )130.1mm(5 1/8” ), 133.3mm (5 1/4” ), 139.7mm(5 1/2” ), 142.8mm (5 5/8” ), 149.2mm (5 7/8” )152.4mm (6” ), 155.5mm(6 1/8” ), 158.7mm(6 1/4” ), 161.9mm(6 3/8” ), 165.1mm (6 1/2” )190.5mm (7 1/2” ), 193.6mm (7 5/8” ), 200.0mm (7 7/8” )212.7mm(8 3/8” ), 215.9mm (8 1/2” ), 222.2mm(8 3/4” )241.3(9 1/2” ), 244.4(9 5/8” ), 250.8(9 7/8” )269.8(10 5/8” ), 295.3(11 5/8” )311.1(12 1/4” ), 346.0 (13 5/8” ), 349.2(13 3/4” )374.6(14 3/4” )381(15” ), 393.7(15 1/2” ), 406.4(16” )444.5(17 1/2” ), 508(20” ), 558(22” ), 609.6(24” )660.4(26” ) Available models: Steel tooth(IADC code) 111, 121, 131117, 124, 126, 127, 136, 137211, 311216, 217, 227 TCI(IADC code) 415, 435, 417, 437515, 525, 535, 545, 517, 527, 537, 547615, 625, 635, , 617, 627, 637, 737512, 522, 532, 612, 622, 632, 732
