High Voltage Powder Coating System The built-in high voltage static generator applies very light spraying gun (only 450g) with the electrical circuit imported from Germany and full stainless steel powder supply bucket. The built-in high voltage module is robust and removable, the central gas design is unique and the handy trolley can change spraying position rapidly. The high voltage module closely link spraying nozzle so that the high voltage consumption is lower, the discharging effect can be intensified, power loading rate can be increased, corners can be coated by spraying and circular atomization effect is good. The powder delivery is uniform and stable. The generator is used thousands of times every day when the high voltage static generation environment is very bad. In response to this, the Washa applies anti-dust switch to fully split the electrical circuit and gas circuit. The static generation unit is fully enclosed in a box where no dust can enter, therefore, the chances of damaged dramtically decreased. Four different adaptor inserts on the electrical circuit panel and it can be ensured that no mistake can be made. So no matter how far you are away from us and whether or not you are good at electrical circuit, you can change the circuit board directly, which not only reduces the maintenance cost, but also shortens the maintenance time. Washa company keeps the detailed records for all the products sold in order to provide better service for you.
