Product Description FEATURES This machine adopts the periphery surface of the grinding wheel to grind surface of work piece. Vertical plane of work piece can be ground by the end face of the wheel. When ground, work piece is fixed on the electrical magnetic chuck or the table directly according to different ones. The table moves longitudinally by hydraulic drive. The wheel head turns around transversely on the carriage either by hydraulic or by hand, and the device of automatic interlock is mounted. The carriage (together with the wheel head) moves vertically on the column either by hand or by mechanical operating, and an interlock device is mounted. The vertical ball screw, operated lightly and flexibly.Cooling pump motor 0.12 KW Working pressure 1-1.2 MPa Cross feed travel 460 mm Distance from spindle axis to working surface of table max 600 mm, min. 155 mm Elevating motor of wheelhead 0.55 KW Feed system Full-load power 9.2 KW Grinding head interrupted feed per stroke (stepless speed) 5-25 mm Grinding spindle motor 5.5 KW Height (including magnetic table) 400 mm Length 1,000 mm Length of working surface of table 1,000 mm Lubrication pressure 0.2-0.3 MPa Manual cross feed per grad. 0.05 mm Manual cross feed per rev. 3 mm Manual vertical feed for wheelhead per grad. 0.005 mm Manual vertical feed for wheelhead per rev. 0.5 mm Max. carrying capacity 500 kg Motor power of oil pump 3 KW Net weight 3,500 kg Oil pump motor 3 KW Overall dimensions (L x W x H) 2,280 x 1,410 x 2,315 Quantity of table T-slot 3 Rapid wheelhead feed speed 350 mm/min Spindle speed 1,440 r/min Table Table longitudinal feed 3-25 m/min Table longitudinal travel 1,100 mm Wheel dimensions (D x W x D) mm 400 x 50 x 203 Width 400 mm Width of T-slot 18 Width of working surface of table 400 mm Cross feed speed 0.3-2 m/min
