Summary: The cutting-off teeth on the centrifugal turntable turning at a high speed cuts the input cylindrical strip material into short cylindrical strip material into short cylindrical granulates of same length(in certain proportion to diameter of column). Due to combined action of centrifugal force of turntable, friction force between granulate and teeth plate, canister wall and granulate, and the air push force between turntable and material canister wall, all granulates are in three-dimensional helical rolling movement, forming an even rubbing action to manufacture granulates into spheroids. This machine is composed of charge chute, material groove, turntable, discharge device, transmission device, ventilating and dehumidifying device (optional), machine cabinet, control system, pneumatic system. Features: Short production time, high finished ratio Spheroids of good roundness and smooth surface, even internal distribution of compositions in particles. Several different display mode of parameters setting, accurate and convenient adjustment. Perfect interlock protection design, avoiding injury on operators from active parts. Additionally install cooling or heating canister on material groove in accordance with material characteristic. Able to choose orthogonal turntable, radial turntable, or turntable with anti-stick coating and anti-wear coating.Model Item S-250 S-450 S-700 Productivity Kg/batch 0.1-0.6 0.4-2.6 1.0-8.0 Time Min/batch 2.0-10.0 Pellet diameter mm Diameter: 0.4-3.0 Voltage/Frequency V/Hz 380/50 Motor power Kw 2.2 4 7.5 Stepless timing r/min 50-1200 50-1000 50-1000 Compressed air Pressure Mpa 0.4-0.6 Consumption m 3 /min 0.1-0.2 Return ration conformity % >90% Noise db <45 Overall size (LxWxH) mm 900x450x1000 1280x650x1230 1500x900x1300 Net weight Kg 200 200 580
