1, The machine shown in the illustration is to produce wall panel. When the steel sheet is passing through the rollers, it has fine shape and be cut into required length. At present, the wall panel forming machine produced by our company is the roll forming machine for wall profiles which is successfully developed by our company based on advanced technology home and aboard. 2. The wall panel and inner roof panel feature good appearance, high coverage, high strength, high automation, low cost and long lifetime. The panels are widely used in civil construction such as factory, garage and gymnasium. 3. The machine mainly consists of decoiler, guiding equipment, roll forming system, post-cutting equipment, hydraulic station, control system, etc. We also design the machine in accordance with customer's request. roll forming machine Description Specification 1 Main moter power 3 kw 2 Hydaulic sation power 4 kw 3 Hydraulic station pressure 10-12 MPa 4 Control system PLC 5 thickness 0.25-0.6mm 6 Forming speed 12m/min 7 Effective width 850mm 8 Hydraulic oil pump CB-E310 9 Diameter of principal axis 85mm 10 Frame thickness 20mm 11 sprocket P-25.4 12 Material of roller 45#steel hard chrome plating 13 voltage 380v 3 phase 50HZ 14 Total weight 2.4 T 15 Equipment parts: includes: roll forming system, hydraulic system, PLC frequency conversion control system, counter, cutting system, product supporter. Terms, Delivery: in stock Package: package for container Payment: T/T(30% T/T pay in advance, the balance by T/T when we sending the machine) Validity: good for 30 days
