1. The machine shown in the illustration is to produce wall panel. When the steel sheet is passing through the rollers, it has fine shape and be cut into required length. At present, the wall panel forming machine produced by our company is the roll forming machine for wall profiles which is successfully developed by our company based on advanced technology home and aboard. 2. The wall panel and inner roof panel feature good appearance, high coverage, high strength, high automation, low cost and long lifetime. The panels are widely used in civil construction such as factory, garage and gymnasium. 3. The machine mainly consists of decoiler, guiding equipment, roll forming system, post-cutting equipment, hydraulic station, control system, etc. We also design the machine in accordance with customer's request. Description Specification Main moter power 3 kw Hydaulic sation power 4 kw Hydraulic station pressure 10-12 MPa Control system PLC thickness 0.25-0.6mm Forming speed 12m/min Effective width 860mm Hydraulic oil pump CB-E310 Diameter of principal axis 85mm Frame thickness 20mm sprocket P-25.4 Material of roller 45#steel hard chrome plating Extemal dimension 6200mm*1350mm*1300mm Total weight 2.2 T Equipment parts: includes: roll forming system, hydraulic system, PLC frequency conversion control system, counter, cutting system, product supporter.