SYSC-S series semi-automatic solar laminator adopt Siemens S7-200 or S7-1200 PLC as controller. The parameter can be set according to different process requirement of solar module. The feature is vacuum is controllable and the temperature controlled on multi-point.Type Laminating area (mm) Weight (T) SYSC-S2211 2200×1100 4.5 SYSC-S2218 2200×1800 6 SYSC-S2222 2200×2200 7.5 SYSC-S2422 2400×2200 8.0 Technical Parameter Power supply 380V 3 phase 5 wires (Can be customized) Temperature control mode Siemens self-tuning intelligent PID control Pump speed 70L/S(customized) Heating mode Heat by SD320 oil Work temperature range Normal~200 Pumping time 5min(Adjustable),50~20Pa Safety system Temperature exceeding safety control system, Emergency cover opening system. Control mode Siemens S7-200 or S7-1200 PLC Temperature uniformity ±1.5, multi-point temperature control Temperature control precise ≤±0.8 Work time 24 hours continueously Height of Laminating cavity 40mm Rubber board Nonhazardous high temperature resist rubber board