Click to view the original image
Stable spreading appearance. Suitable for indoor and outdoor environment to use. Environment friendly Introduction: The powder coating is divided into five categories: Epoxy powder coating, mixed epoxy and polyester type, fine arts powder coating, outdoors powder coating, and metal type powder coating with hundred kind of colors which contain high lighted, lighted, the sub-lighted, semi-lighted, the color flower type, wrinkle type and so on. Uses: 1- Special designed for automomobile's aluminum wheel-hub. 2- Inner coatings as well as metal utensils. 3- Good for metal powder coatings' vanishing. Feature: 1-Good bond ability and mechanical properties. 2-Smooth and glossy. 3-Excellent chemical mechanical resistance and corrosion resistance. 4-Better heat resistance and light resistance than pure epoxy powder. Products series: 1-Available in standard curing and lower temperature curing 2-Available in multi-colors, different gloss level such as high gloss ( above 90° ), flat gloss( 70-80° ), semi gloss ( 10-60° ), matt( below 10° ), particular color and gloss is made according to customers requirements. 3-Available in various kinds of art textures, such as sandy, wrinkle, lanose grain, hammer tone, metallic effect etc. Physical property: Specific gravity: 1.2~1.8g/cm3 (varied with different color and gloss) Particle size: Average 10~38um, proportion 10~84um > 90%, it can be adjusted if special requirement is put forward to us in advance. As to all inquiries, pls kindly tell the points below: 1- Application: Outdoor or common; What substrate the coating will on 2- Texture: Smooth (Which would you want among high gloss, semi-gloss and matt gloss) or art texture (Which would you want among sand, rough, wrinkle, hammer tone and metal finish) 3- Ral color: What Ral color of coating(eg: Black can be Ral color 9005 or Ral color 9017) Technical data NO Item Index Testing Result 1 Sieve residue 88um above the < 0.5% OK 2 Appearance of film Smooth 3 Impact resistance 50KG, CM direct and indirect ≥ 50 4 Pencil hardness H— 2H ≥ 2H 5 Adhesion(cross cut test) ≤ 1Leve 0 6 Bending test ≤ 1Leve ≤ 1 7 Cupping test ≥ 6mm ≥ 6
