Powder Coating Paint for Hook

Specifications 1. Different color and pattern coating 2. Provide decorative 3. Protective multi-functional coatings 4. Low price, high quality Introduction We can get wrinkles, hammer lines, include, the tortoise shell lines and metallic type art coating, also get half a photosynthetic light coating. We can get fine wrinkles to rough wrinkles look like synthetic leather, widely used in hiding defects of hot strip and molding. Hammer grain powder can get patterns used in casting, spotting, not for outdoor coating. The tortoise shell coating in lines appears wrinkles, export-oriented grain, metallic total collection, as well in wrinkles, export-oriented coatings. Product series Wrinkles, hammer lines, net lines, tortoise shell grain, high gloss, matt, metallic powder coatings are available. Powder physical properties Specific gravity 1-1.7 Particle size distribution according to the patterns Liquidity according to the definite patterns Curing condition 180° C*15min Since coating properties depend on pattern, raw material, coating's physical, mechanical, chemical will be different. Storage The products should be stored in ventilated dry and clean room with the temperature below 30° C. Not to be close to fire and heat and kept out direct sunlight. Outdoor stacking is prohibited. Thus the products can be stored stably for 6 months. The product beyond the date of guarantee should be reexamined, and it can still be used if the inspection pass muster. Avoid inbreathing dust when using the products though the powder coatings are nontoxic. The operations are suggested to wear protective glasses and respirators. Avoid long-term skin touch with the powder if possible. Attention This technical data is only for user reference, the concrete index is to measure under the terms of curing, in case of the problem can not be solved; Please contact the technology department of our company. Technical data Item Index Appearance(visual) Porous without particle agglomerate, homogeneous color Density(g/cm 3 ) 1.4~1.6, depending on color Fineness(200 mesh sieve residue) < 0.5% Storage stability 18 months Curing conditions General gloss type: 180± 5%° C/15-20min also can be set according to special condition Appearance of film(visual) Smooth, slightly orange peeled Film thickness 50~130μ m Gloss(60° gauge head) General gloss type> 85% semi Losstype: 51~84%, matt Type: 5-50% Impact resistance 50kg(4.9Nm) pass Cupping test > 7mm Scratch hardness 4kg(39N) pass Bending test 3mm pass Cross hatch adhesion 100% adhesive Surface hardness 2-3 H Salt spray test 1000hr. Pass Humidity resistance 1000hr. Pass Water immersion test 240hr. Pass Acid resistance(5%HCL) 500hr. Pass