Single screw pelletizier Single screw pelletizer is mainly used in extruding soft and hard thermoplastics, such as PVC, polyethylene and others. With relevent auxiliary machine (including profile machine head), It is used for pellets(ganules). It also can produce several kinds of plastic products, such as film, pipe, board, sheet, hollow product etc. The pelletizer has below advantages 1. Advanced design, 2. High output, good plasticization 3. Low energy consumption 4. Adopt involute gear transmission, low noise, steady operation, large loading, long life and so on.Model SJ45/30 SJ65/33 SJ75/33 SJ90/33 SJ105/33 SJ120/33 SJ150/33 Screw diameter(mm) 45 65 75 90 105 120 150 L/D Ratio 30:1 33:1 33:1 33:1 33:1 33:1 33:1 Driving power (kw) 22/30 45/75/90 90/110 110/185 185/220 285 350 Maxoutput (kg/h) 80-120 120-280 250-400 450-600 600-750 700-900 1000-1300 Screw rotate speed(rpm) 20-200 18-180 15-150 13-130 11-110 10-100 8-80 Center height (mm) 1000 1000 1000 1150 1300 1300 1300 Net weight(kg) 3000 3000 3500 4000 5500 8000 9000
