HPXW-12-D YAG power supply for laser welding machine Main feature: 1. Single chip computer and analogous circuit 2. Adopts constant current and voltage regulation 3. Adopting high frequency IGBT module 4. Mutiple protection avoid fault broading 5. Intelligent fault detection 6. Preset output parameters can be operated on management computer 7. Energy feedback loop makes welding more stable and consistent. 8. Modular design optimizes production and maintance. Specification: Input voltage: AC380 +_15% 50/60 Hz Control current: 100-600A Pulse width: 0.2ms-10ms Laser frequency: 1Hz-100Hz(0Hz jogging control) Output power: <=6KW(singal lamp) <=12KW(double lamps) Parameters setting: Max 100 waveform parameter can be set, each waveform is composed by max 15 sections Environment: Operating temperature: -5-40 degree Relative humidity: Without dew <80% Dust: Less than 0.01G/M3 Dimension: Integrative type 770*610*940 mm Split type --single lamp-482*525*267 mm(single enclosure) Double lamps 482*525*267mm(unit 1) 482*525*200 mm(unit 2)
