5.5kW Paper Board Batten Shaping Machine Insulation Processing Machines A: Usage: To slit batten (cardboard) or process T, trapeze and rectangular type etc. batten for transformers insulators. B: Equipment components: Worktable, support and transmission device, feeding mechanism, milling and chamfering devices, dust collection device (optional), electrical control system C: Processing procedure: 1. Slitting: to cut batten (cardboard) (Max. Width 120mm) lengthwise into strips (Max. 5 strips) with saw bits (Max. 6 saw bits). 2. Shaping without bottom surface: feed---mill and chamfer left surface---mill and chamfer right surface---mill and chamfer top surface---finished product. 3. Shaping with bottom surface: feed---mill and chamfer bottom surface ---mill and chamfer left surface--- mill and chamfer right surface--- mill and chamfer top surface---finished product. D: Specifications: ---- Diameter of tool spindle | 40mm | Max. Width of feeding batten (cardboard) | 120mm | Slit width of batten (cardboard) | 5-30mm | Thickness of batten (cardboard) | T and trapeze type batten | 5-15mm | Rectangular type batten | 5-25mm | Length of batten (cardboard) | 600-3500mm | Speed of tool spindle | 5000-6000r/min | Feed speed of batten (cardboard) | 6-24m/min (stepless adjustment) | Dimensions | 4000(L)1350(W)1550(H)mm | Motor output power | Front-lower tool spindle motor | 3kW | Elevating motor | 0.75kW | Feeding motor | 1.5kW | Upper horizontal spindle motor | 4kW | Lower horizontal spindle motor | 4kW | Left vertical tool spindle motor | 3.0kW | Right vertical tool spindle motor | 3.0kW | Dust collection motor | 5.5kW | ----