26 / 35KV Medium Voltage Underground PVC Insulated Cable Single Core Specifications Cable Wire 1.Responsible within 12 hours 2.Directly Factory Sales 3.CCC,ISO9001,OHSAS,TLC Honor Description:Cable Wire Specification: YJV 26/35KV 1*300 Application: It is used to transmit and distribute power in power transmission and distribution system of 35kV or lower. It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry andcommunication in complete replace of oil immersed paper insulated power cable and in partial replace of PVCinsulated power cable. Using Features: 1. Rated voltage: Uo/U: 26/35kV, 21/35kV, 12/20 kV (24 kV), 8.7/10kV, 8.7/15kV, 6/6kV, 6/10kV. 2. No. of core: Single-core, Three-core. 3. The highest allowed operating temperature of conductor for long-term working is 90oC. In short-circuit (Max. Long-term is no more than 5 seconds). The highest temperature for conductor is no more than 250. 4. D.C Resistance of the conductor complies with the stipulations of GB/T3956-1997. 5. The environment temperature should be no lower than 0 when lay. Otherwise it should be preheated. 6. The cable is laid without horizontal drop limit. The Min. Bending radius of three-core cable should be no smaller than 12 times of cable outer diameter. 7. Working Frequency Voltage Test:. For cable with Uo of 3.6kV or lower: 2.5Uo+2kV/5min without puncture. For cable with Uo of 3.6kv~18kV: 3.5Uo/5min without puncture. For cable with Uo of 21kV and 26 kV: 2.5Uo/30min without puncture. 8. Partial Discharge Test: The discharge volume should be no more than 10pC under 1.73Uo for the cable. This series includes: Copper (aluminum) core, XLPE insulated and sheathed power cables. Copper (aluminum) core, XLPE insulated, PE sheathed power cables. Copper (aluminum) core, XLPE insulated, steel tape armoring PVC sheathed power cables. Copper (aluminum) core, XLPE insulated, steel tape armoring, PE sheathed power cables. Copper (aluminum) core, XLPE insulated, steel wire armoring, PVC sheathed power Cables. Copper (aluminum) core, XLPE insulated, steel wire armoring, PE sheathed power cables Rated voltage: 0.6/1kV, 3.6/6kV. Number of cores: 1 to 6. Relative manufacturing standards: IEC60505, BS, DIN. Packing: Wooden drum, steel wooden drum. Power Cable -Conductor: Solid or stranded copper --Insulation: Cross-linked polyethylene( XLPE or PVC) --Circuit Identication: The insulation shall be red, black ---Filler: Polypropylene lament with lapped binding tape --Inner Sheath: Polyvinyl chloride (Black) --Armor: Galvanized steel wire --Core-covering: Binding tape -Outer Sheath: Polyvinyl chloride (Black) -Application: For use in ducts, trays and direct burial in ground. The cable is subject to immerse in water all the time. -Standards / Testing Specications: IEC 60502-1. The type, Name, Suitable areas: ---- Type | Name | Suitable areas | Copper-conductor | AL-conductor | YJV | YJLV | XLPE-insulated cable sheathed with PVC | Indoor, tunnel, cable channel | YJY | YJLY | XLPE-insulated cable sheathed with polythene | YJV22 | YJLV22 | XLPE-insulated cable sheathed with PVC and armored with steel tape | Direct burial in the ground and the capacity of bearing certain mechanical force, not proper in the pipeline | YJV23 | YJLV23 | XLPE-insulated cable sheathed with polythene and armored with steel tape | YJV32 | YJLV32 | XLPE-insulated cable sheathed with PVC and armored with thin steel wire | The bed river and shallow sea, as the link line between the two platforms of oil and gas station in the water, the capacity of bearing tensile force. | YJV33 | YJLV33 | XLPE-insulated cable sheathed with polythene and armored with thin steel wire | YJV42 | YJLV42 | XLPE-insulated cable sheathed with PVC and armored with thick steel wire | YJV43 | YJLV43 | XLPE-insulated cable sheathed with polythene and armored with thick steel wire | ---- Installation This cable can be installed in duct, tray or direct burial. It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed,so that the safeguarding of persons and the integrity of the product will not be affected by eciencies in the installation. 1. The products are mainly complying with IEC 60502 standard, also can be produced according to OEM requirements and other standards, such as BS standard, DIN standard, ASTM standard, etc. Voltage grade is up to 35kv, cross-section area can be up to 400 sqmm (copper or aluminiun conductor). Conductor long-time operating temperature is