1.High precision, high spindle speed with 24 speeds changes. 2.Ground gear and kinetic-balanced spindle runs smoothly with low noise. 3.Camlock spindle nose, easy to clamp. 4.Big thru-bore of spindle to hold bar stock with large diameter. 5.Big swing over bed suitable for hold special shaped workpiece and dishlike workpiece with large diameter. 6.High grade casting bed, hardened and precision ground guideways. 7.Left-handwheel apron and right-handwheel apron are available for users to choose.Each of them equipped with a quick travel device and an easy operated level. 8.Three-axis sliding mechanism in feed box, giving big feeds and threads ranges.Quick and easy speeds and threading changes. 9.Tailstock spindle can move at two speeds.Drilling is very easy.The scale on the handwheel indicates the distance the spindle moves. 10.On user's request, the following accessories are available:Foot brake, taper turning attachment, thread chasing dia (metric or inch), mechanical stop divice quick-change tool post, centralization lubrication device and cross feed quick-release lever.Model CS6166B CS6266B CS 6166C CS 6266C Capacity Swing over bed 600mm Swing over cross slide 420mm Swing in gap 870mm (gap bed lathe) Length in gap 240mm (gap bed lathe) Max. length of workpiece 100/1500/2000/ 3000mm Head stock Spindle nose ISO702/II No. 8 Camlock Spindle bore Ø 82mm Ø 105mm Taper of spindle bore Ø 90mm Ø 113mm Range of spindle speed 9-1600rpm 24 steps 36-1600rpm 12 steps Max. output of spindle torque 1500 N. m 1200 N. m Feeds andthreads Max. travel of compound rest 145mm Max. travel of cross slide 310mm Leadscrew pitch 12mm or 2 TPI Section of tool 25x 25mm Spindle center to tool support 28mm Longitudinal quick moving speed 4.5m /min, 50HZ ; 5.4m /min, 60HZ Crosswise quick moving speed 1.9m /min, 50HZ ; 2.3m /min, 60HZ Longitudinal feeds range 93 kinds, 0.028 -6.43 mm /rev 65 kinds, 0.063 -2.52 mm /rev Cross feeds range 93 kinds, 0.012 -2.37mm /rev 65 kinds, 0.027 -1.07 mm /rev Metric threads range 48 kinds, 0.5 -224 mm 22 kinds, 1 -14 mm Inch threads range 49 kinds, 72-1/8 TPI 25 kinds, 20-2 TPI Module threads range 42 kinds, 0.5 -122 mm 18 kinds, 0.5 -7 mm Diametral threads range 45 kinds, 56-1/4 DP 24 kinds, 56-4 DP Tailstock Dia. of tailstock sleeve Ø 75mm Morse taper of tailstock sleeve MT5 Travel of tailstock sleeve 150mm Cross adjustment + 15mm Motor Power of main motor 7.5KW (10HP), 3PH, 1450rpm/50HZ; 1750rpm/60HZ Power of quick-travel motor 250W (1/3HP), 3PH Power coolant pump 90W (1/8HP), 3PH Available voltage/cycle 220V, 380V, 420V/50HZ, 60HZ Dimensionand weight Overall dimension 263/313/363/463X105X 135cm Packing size 280/330/380/480x115x 187cm Net weight 2400/2600/2800/3000kgs Gross weight 3075/3250/3450/3650kgs
