Horizontal Lathe (CZ62100)

-Sturdy slide and apron, especially designed to withstand high cutting forces -Induction hardened and ground guideways -Headstock on tapered roller bearings -Central, practical controls for feeds and thread leads -Diametric, inch, module, and metric threads -Handwheel for tailstock adjustment -Large spindle bore -Central lubricationModel CZ6285 CZ62100 CZ62120 Capacities Max. swing over bed 850mm 1000mm 1200mm Max. swing over cross slide 555mm 600mm 600mm Center distance 750.1000.1500, 2000, 3000,4000mm Max. swing over gap 1050mm 1200mm 1400mm Valid length of gap 300mm Bed width 490mmor 500mm Headstock Spindle hole 105mm Spindle nose C-11 or D-11 Spindle taper MT100 Spindle speeds (no. ) 14-750 or 18-900 (18 steps) Gear box threads and feeds Metric threads range 1-240 (54 kinds) Inch threads range 28-1 inch (37kinds) Moudle threads range 0.5-60 DP (45kinds) Diametral threads range 30-1 TPI (27kinds) Longtudinal feeds range 0.05-1.42mm/r (72kinds) Cross feeds range 0.015-0.48mm/r (72kinds) Rapid feed: long. /cross 6/2m/min Leadscrew size: diameter/pitch T48mm/12mm carriage Cross slide travel 400mm Compound rest travel 230mm Size of tool shank 32x32mm Tailstock Spindle diameter 100mmor 120mm Spindle taper Morse 6 Spindle travel 205mm motor Main drive motor 11KW Coolant pump motor 0.09KW Rapid feed motor 0.12KW or 0.18KW Net weight Center distance 750mm 3700kgs 1000mm 4000kgs 1500mm 4500kgs 2000mm 5000kgs 3000mm 5500kgs 4000mm 6000kgs Overall dimension Center distance 750mm 2792x1276x1390mm 1000mm 3042x1276x1390mm 1500mm 3542x1276x1390mm 2000mm 3952x1276x1390mm 3000mm 4952x1276x1390mm 4000mm 5952x1276x1390mm