Con-rod boring machine has good performance,better structure,easy operation and high accuracy and can meet customer's demand. The machine is mainly used in boring rod bushing hole (rod bushing and copper bush) of diesel and gasoline engine of automobiles and tractors.In case of necessity,rod bushing seat hole can be fine-bored. The rough and fine boring processing for the holes on other parts can be also completed after changing the corresponding clamps. Besides,it has the accessories for centering sectifying tools,boring tools and micro-adjustment tools holder etc.Model T8210D T8216 Diameter range of boring hole Φ16- Φ100 mm Φ15- Φ150 mm Centre distance of link two hole 100 -425 mm 85 -600 mm Longitudinal travel of worktable 220 mm 320 m Spindle speed 350, 530, 780, 1180 rpm 140, 215, 355, 550, 785, 1200 rpm Transverse adjusting amount of fixture 80 mm 80 mm Feeding speed of worktable 16 -250 mm /min 16 -250 mm /min Traveling speed of working 1800 mm /min 1800 mm /min Diameter of boring bar (4 class) 14, 16, 24, 40 mm 14, 29, 38, 59 mm Main motor power 0.65/0.85 Kw 0.85/1.1 Kw Motor power of oil pump 0.55 Kw 0.55 Kw Overall dimensions(L × W × H) 1150 × 570 × 1710 mm 1300 × 860 × 1760 mm Packing dimensions(L × W × H) 1700 × 950 × 1450 mm 1850 × 1100 × 1700 mm N.W/G.W 700/ 900 kg 900/ 1100 kg
