1, The machine shown in the illustration is to produce wall panel. When the steel sheet is passing through the rollers, it has fine shape and be cut into required length. At present, the wall panel forming machine produced by our company is the roll forming machine for wall profiles which is successfully developed by our company based on advanced technology home and aboard. 2. The wall panel and inner roof panel feature good appearance, high coverage, high strength, high automation, low cost and long lifetime. The panels are widely used in civil construction such as factory, garage and gymnasium. 3. The machine mainly consists of decoiler, guiding equipment, roll forming system, post-cutting equipment, hydraulic station, control system, etc. We also design the machine in accordance with customer's request. Floor decking roll forming machine Description Specification 1 Main moter power 18.5 kw 2 Hydaulic sation power 5.5kw 3 Hydraulic station pressure 10-12 MPa 4 Control system PLC 5 thickness 0.8-1.2mm 6 Forming speed 12m/min 7 Forming station 24 8 Cutting material of blade Cr12 9 Hydraulic oil pump CB-E310 10 Diameter of principal axis 85mm 11 Frame thickness 20mm 12 sprocket P-25.4 13 Active shaft material High grade No. 45 carbon steel 14 Material of roller 45#steel hard chrome plating 15 voltage 380v 3 phase 60HZ 16 Total weight About 5 T 17 Equipment parts: includes: roll forming system, hydraulic system, PLC frequency conversion control system, counter, cutting system, product supporter. terms, Delivery: in stock Package: package for container Payment: T/T(30% T/T pay in advance, the balance by T/T when we sending the machine) Validity: good for 30 days
