Chemical composition of incoloy series alloys is provided below:
Element |
Incoloy 800 |
Incoloy 800H |
Incoloy 800HT |
Ni |
30.0-35.0 |
30.0-35.0 |
30.0-35.0 |
Cr |
19.0-23.0 |
19.0-23.0 |
19.0-23.0 |
Fe |
39.5 min. |
39.5 min |
39.5 min |
C |
0.10 max |
0.05-0.10 |
0.06-0.10 |
Al |
0.15-0.60 |
0.15-0.60 |
0.25-0.60 |
Ti |
0.15-0.60 |
0.15-0.60 |
0.25-0.60 |
Al+Ti |
0.30-1.20 |
0.30-1.20 |
0.85-1.20 |
ASTM grain size |
Not mentioned |
5 or coarser |
5 or coarser |
Physical properties of Incoloy 800H/800HT alloy
Density g/cm3 |
7.94 |
Melting Range |
2475-2525oF or 1357-1385oC |
Specific Heat |
460 J/kg•°C |
Permeability at 70°F (21°C), Annealed |
1.014 |
Curie Temperature |
-175oF or -115oC |
The Incoloy 800 alloy is also widely used in the industrial heating systems. In the different kinds of heating furnaces, these alloys are utilized in the radiant tubes, muffles, retorts, and assorted furnace fixtures. Moreover power production plants use these alloys in the steam superheating tubing and elevated temperature heat exchangers in gas-quenched nuclear reactors.