1. The machine shown in the illustration is to produce wall panel. When the steel sheet is passing through the rollers, it has fine shape and be cut into required length. At present, the wall panel forming machine produced by our company is the roll forming machine for wall profiles which is successfully developed by our company based on advanced technology home and aboard. 2. The wall panel and inner roof panel feature good appearance, high coverage, high strength, high automation, low cost and long lifetime. The panels are widely used in civil construction such as factory, garage and gymnasium. 3. The machine mainly consists of decoiler, guiding equipment, roll forming system, post-cutting equipment, hydraulic station, control system, etc. We also design the machine in accordance with customer's request.Description Specification Main motor power 3 KW Hydraulic station power 3KW Hydraulic station pressure 10-12Mpa Sprocket P-25.4 Forming station 12 Rows Hydraulic oil pump CB-E310 Middle plate 20mm Material of blade Cr12 Thickness 0.25-1.2mm Processing speed 8-12m/min Forming station 12 rows Dimension of principal axis 85-90mm Material of roller 45#steel hard chrome plating Voltage 380V, 3 Phase, 50HZ Installation dimension about(L*W*H) 6.5*1.5*1.4M Weight About 4.6T Equipment parts: including forming system, hydraulic system PLC control system, hydraulic cutting system, products supporter, counter and so on Terms, Delivery: in stock Package: package for container Payment: T/T(30% T/T pay in advance, the balance by T/T when we sending the machine) Validity: good for 30 days